Audeze Maxwell / MM-100 Headband Installation
What you'll need: No tools required—just your hands and the new headband.
Installation Time 🕓 : 2 minutes
Step 1: Note the Strap Length Settings
Check the current strap length setting on your stock headband. There are five different adjustment options—remember which one you’re using before removing the old strap.
Step 2: Remove the Stock Strap
Gently pull the stock strap off the pegs one at a time. There are four pegs in total (two on each side.)
Step 3: Install the New Headband
Using the same length setting as the stock strap, slide the new headband into place. Ensure the cushion side faces downward (toward your head). Push the pegs back into the holes until they notch securely into place.
You're all set!
Your Audeze headphones now have a fresh headband, ready for your listening sessions. Enjoy!
